top of page
MEDIUM AR 1.25 " PUMPS
These pumps are ideal for SWL of 40-100ft.  Shorter versions can be used where in the well clearance is an issue or pumping effort needs to be reduced without adding the optional lever.  Pick a length that is atleast 10ft longer than your SWL
Check out the demo video to the left
Scroll down for more info.  Enter length for final price.

MEDIUM AR 1.25 " PUMPS

$0.00Price

  • The AR pump is ideal for wells that have a static water level of 40-100ft. 

     

    The AR pump has a Teflon cup sealed piston and is driven by pump rods via the standard "Tee" handle.  One can expect 3-4 gpm with the AR pump depending on how fast you pump. A kitchen sink is typically 2.2 gpm for comparison.

     

    Every finished AR pump is tested under 100ft of simulated head pressure.  All pumps that pass muster are cleaned and dried prior to shipping.

     

    Every wetted part of the AR pump is either Stainless Steel, PVC or Teflon.  These are high performance modern materials that make the AR pump completely rust proof and make an emergency pump that will outlast the life of your well.  Most people can install it in less than 60 minutes and all models include everything you need for a working pump.  A Tee handle is standard for these pumps since the pumping effort of the smaller piston is low.  The optional pump lever can be easily added and should be considered.

     

    Every AR pump kit includes everything needed to install a working pump

    ​

    Pick a pump model that will be 10 ft deeper than your static water level.  The numbers of our models represent how deep the pumps will go and the only difference is how many 5ft extensions are added to our base kit.  Each extension consists of a 5ft stainless steel pump rod and a 5ft white drop pipe. 

     

    So, if your static water level is 53 ft, choose an AR 63 since it will reach down 63 ft.  An AR63 includes 12 extensions (12 X 5ft extensions =60ft plus the 3ft long pump, 60ft +3ft=63ft).  

    ​

    Watch our demo video here to see this incredible pump working on a bridge where nothing can be faked.  The new AR pump uses rods not the cable shown in the video.

  • This is a complete pump kit, no additional materials are needed. Kit includes;

     

    State of the art Pump with UV stabilized PVC Pumphead, Spigot (w discharge pipe threads) and Tee Handle.

     

    All the 5ft PVC Drop Pipes (w preglued threaded adapters), Stainless Steel Pump Rods (w SS hardware) and polypro safety rope needed for the depth selected. One Uppermost Blue Drop Pipe with predrilled weephole and Pumphead Adapter.

     

    Also included; Wonder Block (notched wooden block for installation), SS U-Bolt, SS Eyebolt, Rubber Grommet, Drop Pipe Handle, Pumphead Plug, Spigot Plug, 3/4 Tube Adapter. 

     

    Online video and printable pdf installation instructions.

bottom of page